HOME |   PRODUCTS   |    SERVICES    |   CONTACT INFORMATION    |   TECHNICAL INFORMATION   |    INDUSTRY LINKS

 
You are here: Home » Products » Tower Lighting

»  HOME

» PRODUCTS 

 

Lighting Kits

Print Current Page  E-mail Sales  Quick info/Quote request

 TOWER LIGHTING

 Strobe & Dual Lighting Systems Available Upon Request


SINGLE OBSTRUCTION LIGHT,
STEADY BURN OR FLASHING LED

• LED Light
• Meets FAA specifications
• Cast Aluminum casing with a side hub
• High quality porcelain receptacle
• Shatter-proof light weight gaskets
• Stainless steel latches, screws and nuts
• Conduit size: 3/4" OD
• Weight: 3 lbs.
• Height: 20.3Cm
• 120V / 240V
 

SINGLE OBSTRUCTION LIGHT, STEADY BURN OR FLASHING

• Incandescent light Bulb, 10000hrs
• Meets FAA specifications
• Side hub
• Weight: 3 lbs.
• Height: 20.3Cm
• 120V / 240V
• High quality porcelain receptacle
• Shatter-proof light weight gaskets
• Stainless steel latches, screws and nuts
• Conduit size: 3/4" OD

DOUBLE OBSTRUCTION LIGHT,
STEADY BURN OR FLASHING

• Incandescent type
• Meets FAA specifications
• Bottom hub
• Weight: 5.3 lbs.
• L 27.5cm x H 17.5cm x W 12.2cm
• 120V / 240V
• High quality porcelain receptacles
• Neoprene gaskets for weather proofing
• Stainless steel latches, screws and nuts
• Conduit size: 1" OD

RED CODE BEACON, FLASHING

• For structures taller than 150' AGL.
• Incandescent type
• Meets FAA specifications
• Height: 30.5" (77.47cm)
• Weight: 68 LB (30.8 Kg)
• Power: 120 / 240, 50 or 60 Hz
• Beacon requires two 620W or 700W lamps
• Bulbs sold separately. Bulbs are replaceable without special tools
• Red Fresnel Pyrex Glass
• Neoprene and Teflon gaskets for superior weather seal
• Wind load: CAAA 1.6 sq. ft
• 5, 3 or 4 conductor SO Cord pigtail
• Four mounting holes 11/16" spaced 90° on 13-1/4" (33.7 cm) bolt.

LIGHTING KITS

 

 

 

A typical lighting kit includes the following:

• Obstruction lights with 10000Hrs incandescent bulbs
• Junction box
• Photo sensor
• Power cable (Conduit and Conduit wire are options)
• Light Controller
• Assembly hardware such as U-bolts and connection bolts ...

Design of a lighting kit is regulated by governmental organizations.
The one factor in determining lighting requirement is the structures' height.
FAA regulates the U.S. industry.

Determining the appropriate lighting kit:

Home | Contact Information | About J-Crow | |  
>> Legal Terms and Conditions >>